RS Standard Cube Style Shaft Encoder

        Home      About Us      Contact Us      Glossary and Index      What's New

Incremental

 

Shaft Encoders

 

Hollow Shaft

 

Wheeled

 

Programmable

 

Options

 

Accessories

 

Absolute

 

Models

 

Options

 

Accessories

 

Photo-Electronics

 

 

 

RS encoder

Description (180k)

Specifications (99k)

Dimensions

See also RS-P programmable

Standard 2-1/4" Cube Style Encoder

A 2-1/4" cube incremental encoder with four 6-32 x 1/4" deep mounting holes on a 2" diameter bolt circle located on both ends and the bottom. The enclosure is constructed of 1/8" minimum thick aluminum with a connector and single or double ended shaft. This model is compatible with most cube style encoders on the market.

It is available with 1/4", 5/16", 3/8", or 1/2" shaft diameters. Heavy duty bearings are available with up to 3/8" single ended shaft (see M182 option).

Model Number

RS shaft size shaft style output type - pulses per revolution anti-jitter / supply voltage output circuit modification   accessories
 
A= 5/16"
B= 3/8"
C= 1/4"
.5= 1/2"
Single ended shaft is standard

 
D= Double ended shaft

Single pulse output on A is standard
Q=  Quadrature A and B outputs
Z= Outputs A and Z
NZ= Outputs A and inverted Z
QZ= Outputs A, B and Z
QNZ= Outputs A, B and  inverted Z
  1 to 1200

(most values available;
enter dual and triple pulses per revolution separated by "/")

 AJ = anti-jitter option

(single output only)

   5, 5R

12, 12R

15

24

8-30

current sinking is standard

 
C= open collector
D= differential line driver
P= current sourcing
Optional modification number

(see modified versions table below)

 see the accessories table below

 

Example: RSBDQ - 100 / 12R    M80 Example: RSC - 270 / 27 / 12C
bulletRS cube sytle encoder
bullet3/8" diameter shaft
bulletdouble ended shaft
bulletquadrature (A and B) pulse output
bullet100 pulses per revolution on each output
bulletoperates on 12-27 vdc
bulletcurrent sinking output circuit
bulletM80 modification (see table below)
bulletRS cube style encoder
bullet1/4" diameter shaft
bulletsingle ended shaft
bulletdual pulses per revolutuion with 270 ppr on output A and 27 ppr on output B
bulletoperates on 12 vdc
bulletopen collector output circuit

Note: Not all features are listed. Some combinations are mutually exclusive.

Standard Features and Options

bullet

Short-Circuit, ESD, and Surge protection are available

bullet

CE Marked (specific models only)

 

Accessories

Top of Page
Measuring Wheels and Shaft Couplings - Mounting - Cables
085 = MB-085
3/8" to 1" rigid coupling

085.75 = MB-085.75
3/8" to 3/4" rigid coupling

085.375 = MB-085.375
3/8" to 3/8" rigid coupling

AE12 = AE100-12-12
3/8" to 3/8" flexible coupling

AE12,10mm = AE100-12-10mm
3/8" to 10mm flexible coupling

MW1 = MW-1-B wheels

MW30 = MW-30-B wheels

MW1R = MW-1R-B wheels

MW30R = MW-30R-B wheels

MW1W = Wide MW-1 wheels

MW30W = Wide MW-30 wheels

  

FL3 = MB-FL3 adapter

FL6 = MB-FL6 adapter

FL8 = MB-FL8 conveyor adapter

FL8A = MB-FL8A conveyor adapter

   10 = connector with 10' of cable

20 = connector with 20' of cable

3M = connector with 3m of cable

6M = connector with 6m of cable

(any length cable in feet or meters)

 

Modified Versions

Top of Page
Modification Description  
M80 Modified connector wiring, ECCI PU863, PU868 compatible
see also M122		 Datasheet (22k)
M88 Current sinking outputs with 1.5K pull-up resistors Datasheet (17k)
M104 6mm shaft diameter Datasheet (25k)
M111 Modified connector wiring Datasheet (19k)
M122 Modified connector wiring, ECCI PU863, PU868 compatible
see also M80		 Datasheet (26k)
M131 Encoder with M12 4-pin connector Datasheet (33k)
M139 Single output encoder with Enhanced Anti-Jitter feature Datasheet (45k)
M143 RS encoder with a Mini-Con-X connector Datasheet (19k)
M149 RS encoder with attached cable Datasheet (20k)
M160 Modified connector wiring Datasheet (19k)
M172 Modified connector wiring to match Red Lion model RPGB encoder Datasheet (26k)
M173 Current sinking outputs with 2.2K pull-up resistors Datasheet (22k)
M182 RS encoder with single ended shaft and heavy duty bearings Datasheet (33k)
M184 RS with MB-FL6 adapter, heavy duty bearings, .86" shaft length Datasheet (45k)
M188 RS with 8-pin connector for +A/-A, +B/-B, +Z/-Z outputs Datasheet (32k)

 

Custom models available

 

 

Send mail to webmaster@photocraftencoders.com with questions or comments about this web site.
Copyright © 2009 Photocraft Inc.
Last modified: February 18, 2010