Incremental
Absolute
|
| |
General Purpose and Environmentally Sealed
A 2.25" diameter incremental encoder with three 6-32 x .25" deep
mounting holes on a 1.75" diameter bolt circle. The enclosure is 3" long with
a side connector or end connector. Many modified versions match ECCI encoders.
See the RG encoder for an economical version that is not
environmentally sealed.
| RJ |
output
type |
- |
pulses
per revolution |
anti-jitter |
/ |
supply
voltage |
output
circuit |
connector |
modification |
| |
|
Single pulse output on A is standard |
| Q= |
Quadrature A and B outputs |
| Z= |
Outputs A and Z |
| NZ= |
Outputs A and inverted Z |
| QZ= |
Outputs A, B and Z |
| QNZ= |
Outputs A, B and inverted Z |
|
|
1 to 1200
(many values available; inquire about dual and tiple outputs) |
AJ = anti-jitter option
(single output only) |
|
5, 5R
12, 12R
15
24
8-30
120AC |
|
current sinking is standard
|
| C= |
open collector |
| D= |
differential line driver |
| P= |
current sourcing |
| T= |
Triac |
|
| End connector is standard
|
| S= |
Side connector |
|
Optional modification number
(see modified versions table below) |
| Example: RJ - 60AJ / 24PS |
Example: RJQNZ - 600 / 5 M76 |
 | RJ shaft encoder |
| single pulse output |
| 60 pulses per revolution |
| Anti-jitter feature |
| operates on 24 vdc |
| current sourcing output circuit |
| side connector |
|
| RJ shaft encoder |
| quadrature and inverted index (A, B, and NZ) pulse outputs |
| 600 pulses per revolution on A and B outputs |
| operates on 5 vdc |
| current sinking output circuit |
| end connector |
| M76 modification (see table below) |
|
Note: Not all features are listed. Some combinations are mutually exclusive.
Standard Features and Options
| Measuring Wheels and
Shaft Couplings |
- |
Mounting |
- |
Cables |
085 = MB-085
3/8" to 1" rigid
coupling
085.75 = MB-085.75
3/8" to 3/4" rigid
coupling
085.375 = MB-085.375
3/8" to 3/8" rigid
coupling
AE12 = AE100-12-12
3/8" to 3/8" flexible
coupling
AE12,10mm = AE100-12-10mm
3/8" to 10mm flexible
coupling
MW1 = MW-1-B wheels
MW30 = MW-30-B wheels
MW1R = MW-1R-B wheels
MW30R = MW-30R-B wheels
MW1W = Wide MW-1 wheels
MW30W = Wide MW-30 wheels |
|
5PY = MB-5PY
adapter
FB2 = MB-FB2
flexible tether
FL = MB-FL
adapter
FL3 = MB-FL3
adapter
FL4 = MB-FL4
adapter
FL6 = MB-FL6
adapter
KOYO = MB-KOYO
adapter
M75 = MB-75
adapter
M76 = MB-76
adapter
M78 = MB-78
adapter
RD2 = MB-RD2
measuring wheel adapter
Y1G = Y-1G
yoke and MB-RD2
measuring wheel adapter
UB2 = MB-UB2
mounting assembly (includes MB-RD2
adapter)
UB2A = MB-UB2A
mounting assembly (includes MB-RD2
adapter) |
|
10 = connector with 10' of cable
20 = connector with 20' of cable
3M = connector with 3m of cable
6M = connector with 6m of cable
(any length cable in feet or meters)
Environmentally sealed cables are available. Please call for
information. |
| Modification |
Description |
|
| M75 |
1" shaft length, 1/2" shaft diameter, MB-75
adapter, ECCI ON25-1024... compatible |
Datasheet (24k) |
| M76 |
.7" shaft length, 3/8" shaft diameter, MB-76
adapter, ECCI PU871/PU876 compatible
(see also M125) |
Datasheet (29k) |
| M77 |
1" shaft length, 1/2" shaft diameter, woodruff key
slot, MB-75
adapter,
ECCI ON25-1024... compatible (see also M169) |
Datasheet (25k) |
| M78 |
1.1" shaft length, 1/2" shaft diamter, MB-78
adapter, end connector,
ECCI ON35-xxx-40/5-169 compatible |
Datasheet (27k) |
| M80 |
Modified connector wiring, ECCI PU863, PU868 compatible
(see also M122) |
Datasheet (22k) |
| M83 |
1.1" shaft length, 1/2" shaft diameter, MB-78
adapter, side connector,
ECCI ON35-xxx-40/5-169 compatible |
Datasheet (26k) |
| M89 |
1/2" shaft length, 1/4" shaft diameter, MB-75
adapter, ECCI OS25-...-40/5-A10 compatible |
Datasheet (25k) |
| M90 |
2.5" square flange (MB-FL), and 7-pin connector
(see also M124 and M178) |
Datasheet (21k) |
| M91 |
10 pin connector for A, B, Z differential line driver
outputs |
Datasheet (23k) |
| M92 |
.6" shaft length, 1/4" shaft diameter, MB-78
adapter, ECCI PU861, PU866 compatible
(see also M110) |
Datasheet (27k) |
| M110 |
.6" shaft length, 1/4" shaft diameter, MB-78
adapter, ECCI PU861, PU866 compatible
(see also M92) |
Datasheet
(27k) |
| M112 |
21mm shaft length, 12mm shaft diameter, MB-75 adapter |
Datasheet
(23k) |
| M114 |
2-11/16" shaft length, 3/8" shaft diameter |
Datasheet
(17k) |
| M120 |
5PY adapter, ECCI PU871, PU876 compatible |
Datasheet
(26k) |
| M122 |
Modified connector wiring, ECCI PU863, PU868 compatible
(see also M80) |
Datasheet
(26k) |
| M124 |
1-5/16" shaft length, 1/2" shaft diameter,
2.5" square flange (MB-FL), 7-pin connector. (see also M90 and
M178) |
Datasheet
(23k) |
| M125 |
.7" shaft length, 3/8" shaft diameter, MB-76
adapter, ECCI PU871/PU876 compatible
(see also M76) |
Datasheet
(28k) |
| M129 |
Encoder with 2 independent, single output circuits |
Datasheet
(24k) |
| M139 |
Single output encoder with Enhanced Anti-Jitter feature |
Datasheet
(45k) |
| M169 |
1" shaft length, 1/2" shaft diameter, key
slot, MB-75
adapter,
ECCI ON25-1024... compatible (see also M77) |
Datasheet
(51k) |
| M178 |
1" shaft length, 1/2" shaft diameter, 2.5"
square flange (MB-FL)
(see also M90 and M124) |
Datasheet
(38k) |
Other Custom
models are available
|
