shown with optional MW-8 wheels and 16mm connector

Specifications (127k) Dimensions See also R22-P Programmable

Example: R22 - 16AJ / 8-30S3 MW8-UB3-10 is an	Example: R22Q - 200 / 8-30DS MW20-3M is an
R22 wheeled encoder single pulse output with 16 pulses per revolution (1/2" per pulse when using the MW-8 measuring wheels) anti-jitter feature operates on 8-30 vdc push/pull output circuit M12 4-pin connector Accessories: MW-8 measuring wheels MB-UB3 mounting bracket 10 ft cable	R22 wheeled encoder quadrature (A and B) pulse outputs with 200 pulses per revolution on each output (1 pulse per millimeter when using MW-20 wheels) operates on 8-30 vdc 7272 line driver output circuit (+A/-A, +B/-B outputs) 16mm circular connector Accessories: MW-20 measuring wheels 3-meter cable

double ended shaft and integral mounting arm Unbreakable code disk

Up to 1200 pulses per revolution Attached cable or optional connector

Heavy duty bearings Short circuit and ESD protected

 

Accessories

Top of Page

Measuring Wheels	-	Mounting	-	Cables
MW8 = MW-8-B wheels 8" circumference MW20 = MW-20-B wheels 20cm circumference MW1 = MW-1-B wheels 12" circumference MW30 = MW-30-B wheels 30cm circumference MW1R = MW-1R-B wheels 12" circumference, O-ring MW30R = MW-30R-B wheels 30cm circumference, O-ring MW1W = Wide MW-1 wheels 12" circumference, 1" wide MW30W = Wide MW-30 wheels 30cm circumference, 25mm wide		Y1G = Y-1 yoke assembly Y2G = Y-2 yoke assembly Y3G = Y-3 yoke assembly UB1 = MB-UB1 under-belt counterweight UB1A = MB-UB1A counterweight with dual weights UB2 = MB-UB2 Offset Mounting UB3 = MB-UB3 under-belt spring assembly UB4 = MB-UB4 under-belt spring assembly		10 = connector with 10' of cable 20 = connector with 20' of cable 3M = connector with 3m of cable 6M = connector with 6m of cable (any length cable in feet or meters)

 

Modified Versions

Top of Page

Modification	Description
M203	Environmentally sealed (IP64)

Custom models available