HS30 Hollow Shaft Encoder

        Home      About Us      Contact Us      Glossary and Index      What's New

Incremental

 

Shaft Encoders

 

Hollow Shaft

 

Wheeled

 

Programmable

 

Options

 

Accessories

 

Absolute

 

Models

 

Options

 

Accessories

 

Photo-Electronics

 

 
HS30 Hollow Shaft Encoder Encoder Specifications (98k)

Dimensions

HS30-P Programmable to be available soon

Up to 1-1/8" / 28mm Diameter Hollow Shaft

The model HS30 is an optical hollow shaft encoder in a 3" diameter housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or tether allows the encoder to float on the shaft without rotating. The HS30 generates up to 3 square wave outputs.

Model Number

HS30 shaft size output type - pulses per revolution anti-jitter / supply voltage output circuit connector modification   accessories
 
.75= 3/4"
.875= 7/8"
1 = 1"
M20= 20mm
M25= 25mm

Others are available

Single pulse output on A is standard
Q=  Quadrature A and B outputs
Z= Outputs A and Z
QZ= Outputs A, B and Z
  1 to 1200 AJ = anti-jitter option

(single output only)

   5

8-30

7272 push/pull is standard
C= 7273 open collector
D= 7272 line driver
DL= 7272 line driver 5vdc

10' (3m) attached cable is standard
S= 16mm circular 6 or 8 pin
S1= D-Sub 9-pin
S3= M12 4-pin
Optional modification number

(see modified versions table below)

 

   see the accessories table below

 

Example: HS301QZ - 100 / 8-30S1 FB5-10 is an Example: HS30M25Q - 1000 / 8-30DS -6M  is an
bulletHS30 hollow shaft encoder
bulletfits a 1" diameter shaft
bulletquadrature (A and B) pulse outputs, and index output (Z)
bullet100 pulses per revolution on A and B outputs
bulletoperates on 8-30 vdc
bulletpush/pull output circuit
bulletD-sub 9-pin connector
bulletincludes MB-FB5 flexible mounting bracket and 10 ft cable
bulletHS30 hollow shaft encoder
bulletfits a 25mm diameter shaft
bulletquadrature (A and B) pulse outputs
bullet1000 pulses per revolution on A and B outputs
bulletoperates on 8-30 vdc
bullet7272 line driver output circuit
bullet16mm circular connector
bulletincludes 6 meter cable

 

Standard Features and Options

bulletUp to 1-1/8" or 28mm shaft bore
bulletUnbreakable code disk
bulletUp to 1200 pulses per revolution
bulletAttached cable or optional connector
bulletHeavy duty bearings
bulletShort circuit and ESD protected

 

Accessories

Top of Page
Shaft Stub - Mounting - Cables
ST.5 = 1/2" diameter shaft stub   FB5 = MB-FB5 flexible tether   10 = connector with 10' of cable

20 = connector with 20' of cable

3M = connector with 3m of cable

6M = connector with 6m of cable

(any length cable in feet or meters)

 

Modified Versions

Top of Page
Modification Description  
M139 Single output encoder with Enhanced Anti-Jitter feature Datasheet (45k)

 

Custom models available

 

 

Send mail to webmaster@photocraftencoders.com with questions or comments about this web site.
Copyright © 2009 Photocraft Inc.
Last modified: February 18, 2010