Incremental
Absolute
|
| |
User Selectable Pulses per Revolution -- Up to .375" /
10mm Hollow Shaft
The model HS25-P is an optical hollow shaft encoder in a 2-1/2" diameter
housing that mounts directly on
an existing shaft assembly. An anti-rotation pin or flexible mounting bracket allows the encoder to
float on the shaft without rotating. The HS25 generates up to 3 square wave
outputs. The number of pulses per revolution is determined by setting
configuration switches accessible through an access port on the face of the
encoder. Any
one of a predefined set of pulses per revolution are available.
| HS25 |
shaft
size |
- P |
program |
/ |
supply
voltage |
output
circuit |
connector |
|
modification |
|
accessories |
| |
| A= |
5/16" |
| B= |
3/8" |
| C= |
1/4" |
| M6= |
6mm |
| M8= |
8mm |
|
|
50/10/B
64AJ
64AJB
64Q
256Q
270AJB
300Q
(inquire for others) |
|
5
8-30
|
|
push/pull is standard |
| C= |
open collector |
|
|
9-pin D-Sub connector is standard
|
| S3= |
4-pin M12 connector |
|
|
Optional modification number |
|
see the accessories table below |
Example: HS25B - P 64AJ / 8-30 FB1-10 is an
 | HS25 hollow shaft encoder |
| fits a 3/8" diameter shaft |
| factory configured with the "64AJ" program that includes the
anti-jitter option and user selectable pulses per revolution from 1 through
64 |
| operates on 8-30 vdc |
| push/pull output circuit. |
| 9-pin D-Sub connector |
| Accessories: MB-FB1 flexible bracket, and a 10 ft. cable |
|
Program |
Description |
|
| 50/10/B |
|
Datasheet
(73k) |
| 64AJ |
|
Datasheet
(107k) |
| 64AJB |
|
Datasheet
(101k) |
| 64Q |
|
Datasheet
(107k) |
| 256Q |
|
Datasheet
(107k) |
| 270AJB |
| Output
Type: single with Anti-Jitter
option, and direction |
| Selectable Pulses per
Revolution: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12,
15, 16, 18, 20, 24, 30, 54, 60 |
| Short-Circuit
and ESD
protection |
| Surge
protection is available |
| CE
Marked |
|
Datasheet
(104k) |
| 300Q |
| Output
Type: quadrature |
| Output
Circuits: push/pull, or open collector (pre-configured at the
factory) |
| Selectable Pulses per Revolution: 2, 3, 4, 5, 10, 15, 20, 25, 30,
50, 60, 75, 100, 150, 300 |
|
Datasheet
(103k) |
| 600AJ2 |
| Output
Type: dual |
| Output
Circuits: push/pull, or open collector (pre-configured at the
factory) |
| Selectable Pulses per Revolution: 200, 240, 300, 360, 400, 480, 600 |
|
Datasheet
(103k) |
| Mounting |
- |
Cables |
AP = Anti-rotation pin
(precision shoulder screw with 1"L x 3/16"D
shoulder)
FB1 = MB-FB1
flexible bracket
FB5 = MB-FB5
flexible tether
|
|
10 = connector with 10' of cable
20 = connector with 20' of cable
3M = connector with 3m of cable
6M = connector with 6m of cable
(any length cable in feet or meters) |
Custom
models available
|
