Incremental
Absolute
|
| |
Up to 5/8" / 16mm Diameter Hollow Shaft
The model HS20 is an optical hollow shaft encoder in a 2" diameter
housing that mounts directly on an existing shaft assembly. A flexible mounting
bracket or tether allows the encoder to float on the shaft without rotating. The
HS20 generates up to 3 square wave outputs.
The encoder is factory configured with a program that
offers one or more features. DIP switches are used to set program parameters.
Examples of some of the available features are: selectable pulses per
revolution, quadrature (A/B) outputs, direction output, and the anti-jitter
feature.
| HS20 |
shaft
size |
-P |
program |
/ |
supply
voltage |
output
circuit |
connector |
|
modification |
|
accessories |
| |
| B= |
3/8" |
| .5= |
1/2" |
| .625= |
5/8" |
| M10= |
10mm |
| M12= |
12mm |
| M16= |
16mm |
|
|
240AJ
64AJ
64Q
|
|
5
8-30 |
|
7272 push/pull is standard |
| C= |
7273 open collector |
| D= |
7272 line driver |
|
|
10' (3m) attached cable is standard |
| S= |
16mm circular connector on side |
|
|
Optional modification number (call for more
information about special modifications)
|
|
see the accessories table below |
| Example: HS20B - P240J / 8-30 FB3 is an |
Example: HS20.5 - P64Q / 8-30DS FB2-10 is an |
 | HS20 hollow shaft encoder |
| fits a 3/8" diameter shaft |
| factory configured with the "P240AJ" program that includes
selectable pulses per revolution up to 240, and the anti-jitter
feature |
| operates on 8-30 vdc |
| push/pull output circuit |
| attached 10' cable |
| includes MB-FB3 flexible mounting bracket |
|
| HS20 hollow shaft encoder |
| fits a 1/2" diameter shaft |
| factory configured with the "P64Q" program that includes
selectable pulses per revolution up to 64, and A and B quadrature
outputs |
| operates on 8-30 vdc |
| 7272 line driver output circuit |
| 16mm circular connector |
| includes MB-FB2 mounting bracket and 10' cable |
|
|
Program |
Description |
|
| 240AJ |
| Output
Type: single with Anti-Jitter
option, and direction |
| Output
Circuits: push/pull, open collector, or differential line driver
(pre-configured at the factory) |
| Selectable Pulses per
Revolution: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 16, 18, 20, 24,
30, 36, 40, 48, 60, 80, 120, 240 |
| Short-Circuit
and ESD
protection |
|
Datasheet
(101k) |
| 64AJ |
|
Datasheet
(105k) |
| 64Q |
|
Datasheet
(105k) |
| Mounting |
- |
Cables |
| FB2 = MB-FB2
flexible tether
FB3 = MB-FB3
flexible mounting bracket |
|
10 = connector with 10' of cable
20 = connector with 20' of cable
3M = connector with 3m of cable
6M = connector with 6m of cable
(any length cable in feet or meters) |
|
