Incremental
Absolute
|
| |
User Selectable Pulses per Revolution in a Cube
Style with Hollow Shaft
The model RS-P is an optical shaft encoder with up to a 1" / 25mm blind
shaft bore in a standard 2¼” cube shaped
housing that is electrically interchangeable with most cube style
encoders on the market. It is designed to mount directly on an existing shaft. A flexible mounting bracket or other type of
tether allows the encoder to float on the shaft without
rotating. The number of pulses per revolution is determined by
setting configuration switches accessible through an access port near the
connector. Any one of a predefined set of pulses per revolution are available.
| Example: HRS1 - P64AJ / 8-30 |
Example: HRSM25 - P64AJ / 5C |
 | HRS cube sytle encoder |
| 1" diameter shaft |
| factory configured with the "64AJ" program that includes
the anti-jitter option and user selectable pulses per revolution from
1 through 64 |
| operates on 8-30 vdc |
| push/pull output circuit |
|
| HRS cube style encoder |
| 25mm diameter shaft |
| factory configured with the "64AJ" program that includes
the anti-jitter option and user selectable pulses per revolution from
1 through 64 |
| operates on 5 vdc |
| open collector output circuit |
|
Standard Features and Options
| Shaft Stub |
- |
Mounting |
- |
Cables |
| ST.5 =
1/2" diameter shaft stub |
|
FB1 = MB-FB1
flexible bracket
FB5 = MB-FB5
flexible bracket
|
|
10 = connector with 10' of cable
20 = connector with 20' of cable
3M = connector with 3m of cable
6M = connector with 6m of cable
(any length cable in feet or meters) |
Custom
models available
|
